Page 22 - \\tsclient\C\Users\Jack Weeks\Desktop\TS Injection Molding Hyd.vp
P. 22
Konus Burners, Primary, and Vat Pumps
168 Manual Valve
When the standby PP3 primary pump is being used to supply oil to
the thermal oil circuits, this valve is open. When necessary to bleed
the oil out of the pump for replacing, the valve should be closed.
Please refer to the “Isolation and Change Out Procedure” for the
sequence for opening and closing this valve.
169 Manual Valve
During normal operation, the valve should be in the closed position.
When necessary to change the pump, this valve should be opened to
allow the fluid to be ported back to the drain tank by the drain pump.
Please refer to the “Isolation and Change Out Procedure” for the
sequence that this valve is opened and closed.
Page 22 Konus Outlet Header
Troubleshooting Thermal Oil Systems
